111.20.213.00 - GEAR PUMP GR2 SNP2NN 6 CC/REV - DANFOSS
zoom_out_map
chevron_left chevron_right
Contact us about this product Did not find what you were looking for?

111.20.213.00 - GEAR PUMP GR2 SNP2NN 6 CC/REV - DANFOSS

Danfoss SNP2NN Group 2 external gear pump, 6 cc/rev fixed displacement, anti-clockwise rotation, 250 bar rated pressure. Standard European flange and shaft, metric female ports. Compact pressure-balanced design for high efficiency. Ideal for compact vehicles and low-flow auxiliary circuits on off-road and industrial machines.

Price available only for registered users

Why choose the Danfoss SNP2NN Group 2 pump?

  • Pressure-balanced design — internal balancing plates for high volumetric efficiency and minimal operational wear
  • High-strength extruded aluminium body — optimal balance of lightweight and structural robustness
  • Hardened steel gears — protection against wear, abrasion and fluid contamination
  • Anti-clockwise rotation (L) — specific configuration for installations requiring reverse rotation from standard
  • European flange and shaft — widely used standard on European tractors and agricultural machinery
  • C3 metric female ports — robust connections with guaranteed sealing
  • Available in 9 displacements: 4 / 6 / 8 / 11 / 14 / 17 / 19 / 22 / 25 cc/rev

Model code breakdown SNP2NN/6,0LN01BAP1C3C3NNNN/NNNNN:

  • SNP2NN → Group 2 gear pump — aluminium body
  • 6,0 → 6 cc/rev displacement
  • L → Anti-clockwise rotation (left, viewed from shaft)
  • N → No integral pressure relief valve
  • 01BA → Standard European flange + European cylindrical shaft
  • P1 → Single shaft seal
  • C3C3 → Metric female ports — inlet/outlet
  • NNNN/NNNNN → Standard configuration

Key technical data:

  • Code No.: 111.20.213.00
  • Model: SNP2NN/6,0LN01BAP1C3C3NNNN/NNNNN
  • Group: GR2 (Group 2)
  • Displacement: 6 cc/rev
  • Rated pressure: 250 bar [3,625 psi]
  • Maximum pressure: 270 bar [3,915 psi]
  • Maximum speed: ~3,500 rpm
  • Theoretical flow at 1,500 rpm: ~9 l/min
  • Theoretical flow at 2,000 rpm: ~12 l/min
  • Rotation: Anti-clockwise (viewed from shaft)
  • Flange: European standard
  • Shaft: European cylindrical
  • Ports: C3 metric female
  • Shaft seal: Single
  • Fluid: Mineral hydraulic oil

Typical applications: Low-flow auxiliary circuits, hydraulic steering, pilot systems on compact vehicles, agricultural tractors, light construction machinery and industrial applications requiring anti-clockwise rotation

111.20.213.00
Danfoss