111.10.032.00 - GEAR PUMP GR1 SNP1NN 4.3 CC/REV - DANFOSS
zoom_out_map
chevron_left chevron_right
Contact us about this product Did not find what you were looking for?

111.10.032.00 - GEAR PUMP GR1 SNP1NN 4.3 CC/REV - DANFOSS

Danfoss SNP1NN Group 1 external gear pump, 4.3 cc/rev fixed displacement, clockwise rotation, 250 bar rated pressure. Standard European flange, European cylindrical shaft with key, F3 metric female ports. Theoretical flow up to 17.2 l/min at 4,000 rpm. Compact and lightweight design for auxiliary, pilot and steering circuits on compact vehicles and light industrial machines.

Price available only for registered users

Why choose the Danfoss SNP1NN Group 1 pump?

  • Pressure-balanced design — high volumetric efficiency and minimal wear across the full operating range
  • Extruded aluminium body — ultra-compact design with optimal weight-to-robustness ratio
  • Case-hardened steel gears — protection against wear, abrasion and fluid contamination
  • Standard European flange — compatible with most motors and gearboxes on European agricultural machinery
  • European cylindrical shaft with key — precise and standardised mechanical connection
  • F3 metric female ports — widely used European standard, easy installation and guaranteed sealing
  • Maximum speed 4,000 rpm — fast response and consistent flow even at high speeds
  • SNP1 displacement range: 1.2 / 1.7 / 2.2 / 2.6 / 3.2 / 3.8 / 4.3 / 6.0 / 7.8 cc/rev

Model code breakdown SNP1NN/4,3RN01BAP1F3F3NNNN/NNNNN:

  • SNP1NN → Group 1 gear pump — aluminium body
  • 4,3 → 4.3 cc/rev displacement
  • R → Clockwise rotation (viewed from shaft)
  • N → No integral pressure relief valve
  • 01 → Standard European flange
  • BA → European cylindrical shaft with key
  • P1 → Single shaft seal
  • F3/F3 → Metric female ports — inlet/outlet (same size)
  • NNNN/NNNNN → Standard configuration

Key technical data:

  • Code No.: 111.10.032.00
  • Model: SNP1NN/4,3RN01BAP1F3F3NNNN/NNNNN
  • Group: GR1 (Group 1)
  • Displacement: 4.3 cc/rev
  • Rated pressure: 250 bar [3,625 psi]
  • Maximum pressure: 270 bar [3,915 psi]
  • Maximum speed: 4,000 rpm
  • Minimum speed: ~800 rpm
  • Theoretical flow at 1,500 rpm: ~6.5 l/min
  • Theoretical flow at 2,000 rpm: ~8.6 l/min
  • Theoretical flow at 4,000 rpm: ~17.2 l/min
  • Rotation: Clockwise (viewed from shaft)
  • Flange: Standard European
  • Shaft: European cylindrical with key
  • Ports: F3 metric female — inlet/outlet
  • Shaft seal: Single
  • Fluid: Mineral hydraulic oil

Typical applications: Hydraulic steering, pilot and low-flow auxiliary circuits on compact agricultural tractors, light construction vehicles, forklifts, industrial machines and low-displacement hydraulic systems

111.10.032.00
Danfoss