Hydraulics

In this category you can find all the hydraulic products: engines, pumps, valves, idroguides.

 Show Moreexpand_more
 Show Lessexpand_less
151Z8206 - TMVW 500 ORBITAL MOTOR - DANFOSS
151Z8206 - TMVW 500 ORBITAL MOTOR - DANFOSS
TMT/TMV/TMK series, for tough applications
With pressure capability up to 350 bar [5,080 psi] and high starting torque, the TMT/TMV/TMK series is the energy-efficient choice for the toughest working environments.
Leading performance with a long lifetime makes light work of the heaviest duties. Up against high pressures, thin oil or frequent reversals, our motors are guaranteed to perform smoothly and efficiently - even at low speed.
Sign-in Sign-in  
150-3133 - OSPC 50 LS STEERING UNIT - DANFOSS
150-3133 - OSPC 50 LS STEERING UNIT - DANFOSS
Open center and load sensing models.
Features
Low noice
Good steering controlability
Low steering torque 0.8 to 3.0 N
High back pressure possible up to 40bar
One or several built in valve functions possible: pressure relief, shock and suction in L + R, check valve in P and in LS
Target applications
Small tractors
Backhoe loader
Road building machinery
Combines and harvesters etc.
Sign-in Sign-in  
150G6010 - OSPC 125 LS STEERING UNIT - DANFOSS
150G6010 - OSPC 125 LS STEERING UNIT - DANFOSS
Open center and load sensing models.
Features
Low noice
Good steering controlability
Low steering torque 0.8 to 3.0 N
High back pressure possible up to 40bar
One or several built in valve functions possible: pressure relief, shock and suction in L + R, check valve in P and in LS
Target applications
Small tractors
Backhoe loader
Road building machinery
Combines and harvesters etc.
Sign-in Sign-in  
11113149 - OSPD 80/280 LS STEERING UNIT - DANFOSS
11113149 - OSPD 80/280 LS STEERING UNIT - DANFOSS
Features
The OSPD is equipped with two rotary meters (gearwheel sets).
In the absence of pump supply, only one rotary meter is active for emergency steering.
Under normal steering conditions, both rotary meters are active.
With the OSPD, even heavy vehicles can, in many cases, comply with regulations and be steered without the emergency pump.
Displacement ratio between normal and emergency steering ranges from 2 to 7.
Low noise level
Good steering controllability
Low steering torque: from 0.8 to 3.0 N·m
High return pressure possible: up to 40 bar
One or more integrated valve functions available:
Pressure relief valve
Shock and suction valves in L + R
Check valve in P and LS
Sign-in Sign-in  
11199921 - 400 SERIES CE 260 ORBITAL MOTOR - IMPRO FLUIDTEK
11199921 - 400 SERIES CE 260 ORBITAL MOTOR - IMPRO FLUIDTEK
400 SERIES CE 260 ORBITAL MOTOR
CE400260W3820AAAAAS
The combination of compact size, light weight and low speed efficiency make the CE motor the best wheel drive motor available. To reduce overall motor length and weight, all unnecessary material was removed from the housing and the valve was placed in the face of the rotor. The pressure compensated balance plate allows the motor to maintain high volumetric efficiencies at startup and high mechanical efficiencies during running conditions. All of these features unite to make the CE Series motor 10-25% lighter and more compact than competitive designs, making it perfect for applications with strict weight and size requirements.
Sign-in Sign-in  
150-7175 - OSPL 1200 LS STEERING UNIT - DANFOSS
150-7175 - OSPL 1200 LS STEERING UNIT - DANFOSS
The OSPL has an extended maximum steering pressure up to 240 bar (P-T). It is only available in LS versions (static and dynamic). It has been developed especially for large displacement in order to minimize flow loss. It is therefore extremely suitable for large vehicles.
Features
Cover large displacements
Higher steering pressure
Low noise level
Low pressure drop
Low steering torque
One or more built in valve functions
Good steering controlability
Low steering torque 0.8 to 3.0 N
High back pressure possible up to 40bar
One or several built in valve functions possible: shock and suction in L + R and check valve in P
Target applications
Large forklift trucks
Wheel loaders
Sign-in Sign-in