Home

Model code: H1-B-080-A-A-F2-EA-N-B-TB-VN-CN-N-N-NN-NN-035-Z-00-NNN

Danfoss PLUS+1® MC050-120 programmable microcontroller with 32-bit Cortex-M3 processor, 24 inputs and 14 outputs, 9–36V DC supply, IP67 protection. Programmable with PLUS+1® GUIDE software, DEUTSCH connector, 2x CAN 2.0B ports, 512K internal flash memory. Designed for advanced control of mobile off-highway machines, hydraulic systems and industrial automation applications. Weight: 0.53 kg.

Danfoss SNP3NN Group 3 external gear pump, 48.3 cc/rev fixed displacement, clockwise rotation, 250 bar rated pressure. SAE A 2-bolt flange, European cylindrical shaft with key, F6 metric female ports. Theoretical flow up to 97 l/min at 2,000 rpm. Heavy duty solution for construction machinery, large agricultural vehicles and high-flow mobile hydraulic systems.

Model code: OSPC##-0160-ON##-GGGG-E-M-N-N-N-125-180-1-1-N02-SP2-G01-NN-DNFS-PB

White Drive Motors RE505 series orbital motor, 300 cc/rev displacement, for low flow high pressure applications up to 241 bar [3,500 psi]. Roller Stator gear set for high efficiency and long service life. Flange and shaft configuration 5821, Buna-N seals, integrated slinger seal. Compact low-speed high-torque design — higher flow capacity than the 200cc version for applications requiring elevated torque at higher speeds.

Danfoss SNP1NN Group 1 external gear pump, 2.2 cc/rev fixed displacement, 250 bar rated pressure, 270 bar maximum pressure. Aluminium body with standard European flange and shaft. Designed for low-displacement mobile hydraulic systems — steering, pilot and auxiliary circuits on compact vehicles and industrial machines.

Impro Fluidtek RE series orbital motor, 470 cc/rev displacement, designed for low flow high pressure applications up to 241 bar [3,500 psi]. Low-speed high-torque design with roller gear set for high efficiency and long service life. Flange and shaft configuration 3131, integrated slinger seals. Ideal for mobile off-highway systems requiring high torque at low flow rates in compact installations.

Danfoss 2000 Series fixed displacement orbital motor, 245 cc/rev, low-speed high-torque design for demanding mobile applications. SAE 4-bolt flange mount, 25 mm cylindrical shaft with Woodruff key, tapered roller bearings for high radial and axial loads. Continuous pressure up to 250 bar, continuous torque up to 900 Nm.

Danfoss SNP3NN Group 3 external gear pump, 33.1 cc/rev fixed displacement, clockwise rotation, 250 bar rated pressure. European 4-bolt flange (pilot Ø 50.8 mm), European cylindrical shaft with key, metric female ports. Theoretical flow up to 66 l/min at 2,000 rpm. Heavy duty solution for large construction machinery, large agricultural vehicles and high-flow industrial systems.

OMV-0630-A-EB-G34-AE-1E-F22-A-A-1B-0-N-NN-NNNNN-NN-NN-NN-SP-NNN

Danfoss KPS47 pressure switch for high pressure and strongly pulsating media. Setting range 6–60 bar with adjustable differential 3.5–17 bar. Permissible operating pressure up to 120 bar, IP67 enclosure rating. Designed for alarm, control and monitoring systems in severe industrial environments, diesel plants, compressors and marine applications.

White Drive DT series hydraulic orbital motor with a maximum displacement of 2100 cc/rev, standard 5" mounting flange with side ports and tapered shaft. Designed for heavy-duty applications requiring high torque at low speed, with case drain for extended shaft seal life and driveline lubrication. The compact design and high power-to-weight ratio make this motor ideal for direct-drive applications on construction, forestry and heavy material handling machines. Weight: 32.37 kg.