Danfoss

PVE SerieS 7
The PVE S7 models are 100% backwards compatible with PVE Series 4.

Danfoss CV08-NP cartridge check valve, poppet type normal direction, 0.3 bar cracking pressure. Rated flow 38 l/min at 7 bar, rated pressure 350 bar, SDC08-2 cavity, Buna-N seals. Free flow from port 1 to port 2, flow blocked in reverse direction. Maximum leakage 6 drops/min at rated pressure. Weight: 0.05 kg.

11169243 - PVB 256 MODULE WITH METRIC PORTS PREPARED FOR LSa/b - DANFOSS
PVG 256/128
Model code: SVSWORKM26RER1I300I3004LNP6000B2E0QC86086SSTTF0Z0X0D060A00

Using Danfoss Genuine Parts you can guarantee maximum reliability for your equipment, maximizing productivity and performance.
By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
* Image for illustration purposes only

Using Danfoss Genuine Parts you can guarantee maximum reliability for your equipment, maximizing productivity and performance.
By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
* Image for illustration purposes only

Using Danfoss Genuine Parts you can guarantee maximum reliability for your equipment, maximizing productivity and performance.
By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
* Image for illustration purposes only

Using Danfoss Genuine Parts you can guarantee maximum reliability for your equipment, maximizing productivity and performance.
By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
* Image for illustration purposes only

11171419 - ENDPLATE PVSI 256/128 (WITHOUT Lx) - DANFOSS
PVG 256/128
Model code: SVSENDE20R00LMMCN000000000000000000000000000004403A000000SST0L000Q10A00

11171422 – PVB256/128 TO PVB32/16 INTERFACE MODULE (WITHOUT T0) – DANFOSS
PVG 256/128
Model code: SVSFUNCMLM0000QMC3603A03A00000

Features
The OSPD is equipped with two rotary meters (gear wheel sets).
In the absence of pump power supply, only one rotary meter is active for emergency steering.
Under normal steering conditions, both rotary meters are active.
With the OSPD, even heavy vehicles can, in many cases, comply with regulations and be steered without the emergency pump.
Displacement ratio between normal and emergency steering: from 2 to 7
Low noise level
Good steering controllability
Low steering torque: from 0.8 to 3.0 N
High possible return pressure: up to 40 bar
One or more integrated valve functions possible:
Pressure relief valve
Shock and suction valve in L + RC
Check valve in P and LS

Danfoss Seal kit last longer than other brands' kit, we suggest you use original spare parts.
Offers a wide range of Seal Kit AVAILABLE!
*image for illustration purposes only